44 replies to this topic

[Larusso]

Hy there,

You should not be able to select an OS to boot with.
You need to get into your BIOS settings.


When you boot up your PC, very early you should see a message at the bottom of your Display with
Press Fx to enter BIOS setup

The x stands for a random Number. It could also be a different key like Esc and so on.

[oxr52a]

Hi Daniel,

I have figured out how to reach my BIOS settings. After booting from the USB, I reach a screen with the xPUD logo and I select English as the language. From there it goes to a dark screen similar in appearance to MS-DOS and I see that xPUD is loading. But it eventually stops, and the last line is "sh-4.0#" and a flashing cursor. The computer does proceed any further beyond this and I do not get the opportunity to select File or Expand mnt as in your directions. Sound familar?

Thanks,

[Larusso]

Sorry for the delay. Needed to talk with our xPUD Expert

Please download Extra Drivers (driver.opt) and extract it to the root of your USB drive and try again to boot with it

[Larusso]

Hy there

Are you still with us ? If I do not hear from you within 24 hours, this topic will be closed

[LDTate]

Due to the lack of feedback this topic is closed to prevent others from posting here. If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.

Other members who need assistance please start your own topic in a new thread. Thanks!