AdvancedSetup

Please download https://www.safezone.cc/resources/av-block-remover-avbr.224/download AV block remover, unzip it and run. If you possibly can't run it, just rename AVbr.exe -> AV-b-r.exe for instance and run. Or you can use this link to download a random named file to run: https://avbr.safezone.cc/rnd/ If this method doesn't work, run this tool NOT from your Desktop or Downloads folder (use any other folder). If the malware still blocks the utility, then try to run it in Safe Mode with Networking. Follow the instructions. After reboot you'll receive AV_block_remove_date-time.log. Please attach it to your next post.

Hello @SiddharthaLahiri Please run the following Please download and run the following Kaspersky Virus Removal Tool 2020 and save it to your Desktop. (Kaspersky Virus Removal Tool version 20.0.10.0 was released on November 9, 2021) Download: Kaspersky Virus Removal Tool https://devbuilds.s.kaspersky-labs.com/devbuilds/KVRT/latest/full/KVRT.exe How to run a scan with Kaspersky Virus Removal Tool 2020 https://support.kaspersky.com/15674 How to run Kaspersky Virus Removal Tool 2020 in the advanced mode https://support.kaspersky.com/15680 How to restore a file removed during Kaspersky Virus Removal Tool 2020 scan https://support.kaspersky.com/15681 Select the Windows Key and R Key together, the "Run" box should open. Drag and Drop KVRT.exe into the Run Box. C:\Users\{your user name}\DESKTOP\KVRT.exe will now show in the run box. add -dontencrypt Note the space between KVRT.exe and -dontencrypt C:\Users\{your user name}\DESKTOP\KVRT.exe -dontencrypt should now show in the Run box. That addendum to the run command is very important, when the scan does eventually complete the resultant report is normally encrypted, with the extra command it is saved as a readable file. Reports are saved here C:\KVRT2020_Data\Reports and look similar to this report_20210123_113021.klr Right-click direct onto that report, select > open with > Notepad. Save that file and attach it to your reply. To start the scan select OK in the "Run" box. A EULA window will open, tick all confirmation boxes then select "Accept" In the new window select "Change Parameters" In the new window ensure all selection boxes are ticked, then select "OK" The scan should now start... When complete if entries are found there will be options, if "Cure" is offered leave as is. For any other options change to "Delete" then select "Continue" When complete, or if nothing was found select "Close" Attach the report information as previously instructed... Thank you

I would not worry about that specific update. It's due to a known error with the Windows Recovery and Microsoft needs to fix the tool in a future update. For now simply ignore that update Are there any other issues?

Okay, that too found a bunch of stuff. Let's try another scanner Please run the following ESET Online Scanner and perform a Full Scan Click the following link to save the installer for ESET Online Scanner https://download.eset.com/com/eset/tools/online_scanner/latest/esetonlinescanner.exe It will start a download of "esetonlinescanner.exe" Save the file to your system, such as the Downloads folder, or else to the Desktop. Go to the saved file, and double click it to get started. When presented with the initial ESET screen, click on "Get Started". Read and accept the Terms of use On the "Before we start..." screen chose if you want to send anonymous data and if you want to provide feedback or not, then click Continue When prompted for scan type, Click on the Full Scan button Enable ( select ) the radio selection "Enable ESET to detect and quarantine potentially unwanted applications" and click the Start scan button. Have patience. The entire process may take a few hours or more. When the scan is completed, if something was found, it will show a screen with the number of detected items. If so, click the button marked “View detected results”. Click The blue “Save scan log” to save the log and give it a name and location you remember. If something was removed and you know it is a false postive, you may click on the blue ”Restore cleaned files” ( in blue, at the bottom). Press Continue when all done. You should click to turn off the offer for “periodic scanning”. Enable "Delete application data on closing" - You do not need to submit feedback unless you want to. Simply ignore and close the program. Note: If you do need to do a File Restore from ESET please follow the directions below [KB2915] Restore files quarantined by the ESET Online Scanner version 3 https://support.eset.com/en/kb2915-restore-files-quarantined-by-the-eset-online-scanner Please attach the ESET scan log you saved at the end to your next reply

Excellent, glad to hear all is well again. I'll go ahead and close your topic now and wish you well. Please follow the directions below to remove the logs and tools we've used. If any are still left after that you can manually uninstall or delete them. Take care and stay safe out there. Try to follow as much of the advise below as you can as well. Let's go ahead and do some clean-up work and remove the tools and logs we've run. Please download KpRm by kernel-panik and save it to your desktop. right-click kprm_(version).exe and select Run as Administrator. Read and accept the disclaimer. When the tool opens, ensure all boxes under Actions are checked. Under Delete Quarantines select Delete Now, then click Run. Once complete, click OK. A log will open in Notepad titled kprm-(date).txt. You can close it. We're glad that we were able to assist you. The following information will help you to keep your computer and data safer as well as improve your overall privacy Recommend using a Password Manager for all websites, etc. that require a password. Never use the same password on more than one site. https://www.howtogeek.com/780233/best-password-manager/ Make sure you're backing up your files https://forums.malwarebytes.com/topic/136226-backup-software/ Keep all software up to date - PatchMyPC - https://patchmypc.com/home-updater#download https://patchmypc.com/about-us Keep your Operating System up to date and current at all times - https://support.microsoft.com/en-us/windows/windows-update-faq-8a903416-6f45-0718-f5c7-375e92dddeb2 Further tips to help protect your computer data and improve your privacy: https://forums.malwarebytes.com/topic/258363-tips-to-help-protect-from-infection/ Please consider installing the following Content Blockers for your Web browsers if you haven't done so already. This will help improve overall security Malwarebytes Browser Guard Google Chrome: https://chrome.google.com/webstore/detail/malwarebytes-browser-guar/ihcjicgdanjaechkgeegckofjjedodee Microsoft Edge: https://support.malwarebytes.com/hc/en-us/articles/4413298736787-Install-Malwarebytes-Browser-Guard-on-Microsoft-Edge-browser Mozilla Firefox: https://addons.mozilla.org/en-US/firefox/addon/malwarebytes/ uBlock Origin Google Chrome: https://chrome.google.com/webstore/detail/ublock-origin/cjpalhdlnbpafiamejdnhcphjbkeiagm Microsoft Edge: https://microsoftedge.microsoft.com/addons/detail/ublock-origin/odfafepnkmbhccpbejgmiehpchacaeak Mozilla Firefox: https://addons.mozilla.org/en-US/firefox/addon/ublock-origin Cybersecurity basics & protection Everything you need to know about cybercrime https://www.malwarebytes.com/cybersecurity Further reading if you'd like to keep up on the malware threat scene: Malwarebytes Blog https://blog.malwarebytes.com/ Hopefully, we've been able to assist you with correcting your system issues. Thank you for using Malwarebytes. Please tell your friends and family if they too need assistance with malware removal

That log looks pretty good. How is the computer running now? Are there still any signs of infection or any other unresolved issues at this time @Advon0352

We no longer support MBAR standalone. The main Malwarebytes provides more powerful rootkit scanning than the older product did. MB5 Offline Installer https://downloads.malwarebytes.com/file/mb5_offline Run and schedule scans in Desktop Security https://support.malwarebytes.com/hc/en-us/articles/22536932156435-Run-and-schedule-scans-in-Desktop-Security

Please log into your account and contact support https://support.malwarebytes.com/hc/en-us/p/contact_support Thank you

Thank you for the log. It found and removed a few items. Please clean up Google Chrome Please follow the directions from the following topic for a more extensive article on cleaning Google Chrome Resetting Google Chrome to clear unexpected issues Then clean Microsoft Edge too Please try to clean and reset ALL sync data from the Microsoft Edge browser Reset Microsoft Edge data in the cloud https://learn.microsoft.com/en-us/deployedge/edge-learnmore-reset-data-in-cloud Once they're cleaned up run the following scan Let's go ahead and run a couple of scans and get some updated logs from your system. Please read the entire post below before starting so that you're more familiar with the process [ 1 ] Please make the following system changes. Temporarily disable your antivirus real-time protection or other security software first only if it blocks or interferes with the scans or downloads.. Make sure to turn it back on once the scans are completed. Temporarily disable Microsoft SmartScreen to download software below only if needed. Make sure to turn it back on once the scans are completed. Disable-Fast-Startup Show-Hidden-Folders-Files-Extensions [ 2 ] I suggest a new scan for viruses & other malware. This may take several hours, depending on the number of files on the system and the speed of the computer. The Microsoft Safety Scanner is a free Microsoft stand-alone virus scanner that can be used to scan for & remove malware or potentially unwanted software from a system. The download links & the how-to-run-the tool are at this link at Microsoft https://docs.microsoft.com/en-us/windows/security/threat-protection/intelligence/safety-scanner-download Look on the Scan Options & select the FULL scan. Then start the scan. Have lots of patience. It may take several hours. Once you see it has started, take a long long break; walk away. Do not pay credence if you see some intermediate early flash messages on the screen display. The only things that count are the End result at the end of the run. The scan will take several hours. Leave it alone. It will remove any other remaining threats as it goes along. Take a very long break, do your normal personal errands .....just do not use the computer during this scan. This is likely to run for many hours as previously mentioned ( depending on the number of files on your machine & the speed of the hardware.) The log is named MSERT.log and the log will be at C:\Windows\debug\msert.log Please attach that log with your next reply. It is normal for the Microsoft Safety Scanner to show detections during the scan process. It is scanning for basically all bread crumbs or traces of files and registry entries that "might" be or have been part of some infection or previous infection. That DOES NOT mean the computer is infected. Once the scan has been completed it uploads the log to their Cloud service which then uses Artificial Intelligence to determine if in fact any of the traces are an infection or not. Then it writes into the log on your computer what it found. Thank you

Thank you. Please get me some new, fresh logs Scan with SecurityCheck by glax24 https://forums.malwarebytes.com/topic/307301-scan-with-securitycheck-by-glax24/ Scan with FSS Farbar Service Scanner https://forums.malwarebytes.com/topic/306736-scan-with-fss-farbar-service-scanner/ Scan with Farbar Recovery Scan Tool https://forums.malwarebytes.com/topic/306601-scan-with-farbar-recovery-scan-tool/

Clean Talk spam blocking was removed

Thank you for the logs @Shimmer7336 Please run the following Let's go ahead and run a couple of scans and get some updated logs from your system. Please read the entire post below before starting so that you're more familiar with the process [ 1 ] Please make the following system changes. Temporarily disable your antivirus real-time protection or other security software first only if it blocks or interferes with the scans or downloads.. Make sure to turn it back on once the scans are completed. Temporarily disable Microsoft SmartScreen to download software below only if needed. Make sure to turn it back on once the scans are completed. Disable-Fast-Startup Show-Hidden-Folders-Files-Extensions [ 2 ] I suggest a new scan for viruses & other malware. This may take several hours, depending on the number of files on the system and the speed of the computer. The Microsoft Safety Scanner is a free Microsoft stand-alone virus scanner that can be used to scan for & remove malware or potentially unwanted software from a system. The download links & the how-to-run-the tool are at this link at Microsoft https://docs.microsoft.com/en-us/windows/security/threat-protection/intelligence/safety-scanner-download Look on the Scan Options & select the FULL scan. Then start the scan. Have lots of patience. It may take several hours. Once you see it has started, take a long long break; walk away. Do not pay credence if you see some intermediate early flash messages on the screen display. The only things that count are the End result at the end of the run. The scan will take several hours. Leave it alone. It will remove any other remaining threats as it goes along. Take a very long break, do your normal personal errands .....just do not use the computer during this scan. This is likely to run for many hours as previously mentioned ( depending on the number of files on your machine & the speed of the hardware.) The log is named MSERT.log and the log will be at C:\Windows\debug\msert.log Please attach that log with your next reply. It is normal for the Microsoft Safety Scanner to show detections during the scan process. It is scanning for basically all bread crumbs or traces of files and registry entries that "might" be or have been part of some infection or previous infection. That DOES NOT mean the computer is infected. Once the scan has been completed it uploads the log to their Cloud service which then uses Artificial Intelligence to determine if in fact any of the traces are an infection or not. Then it writes into the log on your computer what it found. Thank you

Please restart the computer. Then run the Malwarebytes scan again. Click the following link and run a Scan with Malwarebytes Then run the following Let's go ahead and run a couple of scans and get some updated logs from your system. Please read the entire post below before starting so that you're more familiar with the process [ 1 ] Please make the following system changes. Temporarily disable your antivirus real-time protection or other security software first only if it blocks or interferes with the scans or downloads.. Make sure to turn it back on once the scans are completed. Temporarily disable Microsoft SmartScreen to download software below only if needed. Make sure to turn it back on once the scans are completed. Disable-Fast-Startup Show-Hidden-Folders-Files-Extensions [ 2 ] I suggest a new scan for viruses & other malware. This may take several hours, depending on the number of files on the system and the speed of the computer. The Microsoft Safety Scanner is a free Microsoft stand-alone virus scanner that can be used to scan for & remove malware or potentially unwanted software from a system. The download links & the how-to-run-the tool are at this link at Microsoft https://docs.microsoft.com/en-us/windows/security/threat-protection/intelligence/safety-scanner-download Look on the Scan Options & select the FULL scan. Then start the scan. Have lots of patience. It may take several hours. Once you see it has started, take a long long break; walk away. Do not pay credence if you see some intermediate early flash messages on the screen display. The only things that count are the End result at the end of the run. The scan will take several hours. Leave it alone. It will remove any other remaining threats as it goes along. Take a very long break, do your normal personal errands .....just do not use the computer during this scan. This is likely to run for many hours as previously mentioned ( depending on the number of files on your machine & the speed of the hardware.) The log is named MSERT.log and the log will be at C:\Windows\debug\msert.log Please attach that log with your next reply. It is normal for the Microsoft Safety Scanner to show detections during the scan process. It is scanning for basically all bread crumbs or traces of files and registry entries that "might" be or have been part of some infection or previous infection. That DOES NOT mean the computer is infected. Once the scan has been completed it uploads the log to their Cloud service which then uses Artificial Intelligence to determine if in fact any of the traces are an infection or not. Then it writes into the log on your computer what it found. Thank you

Excellent, glad to hear all is well again. I'll go ahead and close your topic now and wish you well. Please follow the directions below to remove the logs and tools we've used. If any are still left after that you can manually uninstall or delete them. Take care and stay safe out there. Try to follow as much of the advise below as you can as well. Let's go ahead and do some clean-up work and remove the tools and logs we've run. Please download KpRm by kernel-panik and save it to your desktop. right-click kprm_(version).exe and select Run as Administrator. Read and accept the disclaimer. When the tool opens, ensure all boxes under Actions are checked. Under Delete Quarantines select Delete Now, then click Run. Once complete, click OK. A log will open in Notepad titled kprm-(date).txt. You can close it. We're glad that we were able to assist you. The following information will help you to keep your computer and data safer as well as improve your overall privacy Recommend using a Password Manager for all websites, etc. that require a password. Never use the same password on more than one site. https://www.howtogeek.com/780233/best-password-manager/ Make sure you're backing up your files https://forums.malwarebytes.com/topic/136226-backup-software/ Keep all software up to date - PatchMyPC - https://patchmypc.com/home-updater#download https://patchmypc.com/about-us Keep your Operating System up to date and current at all times - https://support.microsoft.com/en-us/windows/windows-update-faq-8a903416-6f45-0718-f5c7-375e92dddeb2 Further tips to help protect your computer data and improve your privacy: https://forums.malwarebytes.com/topic/258363-tips-to-help-protect-from-infection/ Please consider installing the following Content Blockers for your Web browsers if you haven't done so already. This will help improve overall security Malwarebytes Browser Guard Google Chrome: https://chrome.google.com/webstore/detail/malwarebytes-browser-guar/ihcjicgdanjaechkgeegckofjjedodee Microsoft Edge: https://support.malwarebytes.com/hc/en-us/articles/4413298736787-Install-Malwarebytes-Browser-Guard-on-Microsoft-Edge-browser Mozilla Firefox: https://addons.mozilla.org/en-US/firefox/addon/malwarebytes/ uBlock Origin Google Chrome: https://chrome.google.com/webstore/detail/ublock-origin/cjpalhdlnbpafiamejdnhcphjbkeiagm Microsoft Edge: https://microsoftedge.microsoft.com/addons/detail/ublock-origin/odfafepnkmbhccpbejgmiehpchacaeak Mozilla Firefox: https://addons.mozilla.org/en-US/firefox/addon/ublock-origin Cybersecurity basics & protection Everything you need to know about cybercrime https://www.malwarebytes.com/cybersecurity Further reading if you'd like to keep up on the malware threat scene: Malwarebytes Blog https://blog.malwarebytes.com/ Hopefully, we've been able to assist you with correcting your system issues. Thank you for using Malwarebytes. Please tell your friends and family if they too need assistance with malware removal

Thank you. Overall the fix ran well and also found and fixed some other Windows issues. Windows Resource Protection found corrupt files and successfully repaired them. Please go ahead and run the following Let's go ahead and run a couple of scans and get some updated logs from your system. Please read the entire post below before starting so that you're more familiar with the process [ 1 ] Please make the following system changes. Temporarily disable your antivirus real-time protection or other security software first only if it blocks or interferes with the scans or downloads.. Make sure to turn it back on once the scans are completed. Temporarily disable Microsoft SmartScreen to download software below only if needed. Make sure to turn it back on once the scans are completed. Disable-Fast-Startup Show-Hidden-Folders-Files-Extensions [ 2 ] I suggest a new scan for viruses & other malware. This may take several hours, depending on the number of files on the system and the speed of the computer. The Microsoft Safety Scanner is a free Microsoft stand-alone virus scanner that can be used to scan for & remove malware or potentially unwanted software from a system. The download links & the how-to-run-the tool are at this link at Microsoft https://docs.microsoft.com/en-us/windows/security/threat-protection/intelligence/safety-scanner-download Look on the Scan Options & select the FULL scan. Then start the scan. Have lots of patience. It may take several hours. Once you see it has started, take a long long break; walk away. Do not pay credence if you see some intermediate early flash messages on the screen display. The only things that count are the End result at the end of the run. The scan will take several hours. Leave it alone. It will remove any other remaining threats as it goes along. Take a very long break, do your normal personal errands .....just do not use the computer during this scan. This is likely to run for many hours as previously mentioned ( depending on the number of files on your machine & the speed of the hardware.) The log is named MSERT.log and the log will be at C:\Windows\debug\msert.log Please attach that log with your next reply. It is normal for the Microsoft Safety Scanner to show detections during the scan process. It is scanning for basically all bread crumbs or traces of files and registry entries that "might" be or have been part of some infection or previous infection. That DOES NOT mean the computer is infected. Once the scan has been completed it uploads the log to their Cloud service which then uses Artificial Intelligence to determine if in fact any of the traces are an infection or not. Then it writes into the log on your computer what it found. Thank you