Jump to content

Jamestec

Honorary Members
  • Posts

    41
  • Joined

  • Last visited

Reputation

0 Neutral
  1. Hello, I downloaded new firmware for my NVMe enclosure under JEYI_TFT-ScreenTFT显示屏-黑豹.zip, but Malwarebytes says it's Malware.AI.4026709311. https://www.jeyi.com/pages/downloads?spm=..index.header_1.1 I have attached the zip and reports. Thanks, James. JEYI_TFT-ScreenTFT.zip Manual_Scan.txt RTP.txt
  2. You're not a windows update, don't be like one. At least give a very visible warning that an update might require you to restart in 5 minutes (with no option of saying no). I finished opening what I needed to do my work, only to be told I'll need to do it again after my apparently stupid decision to update Malwarebytes. Don't make updating security a bad thing.
  3. Hello, When I use Costura.Fody (https://github.com/Fody/Costura) to embed a reference into my exe, malwarebytes detects my program as MACHINELEARNING/ANOMALOUS.100%. Malwarebytes does not detect anything if I don't use Costura. I have attached the exe in question and a report from Malwarebytes. Some background: I'm making a simple program for my workplace, but the people that will be using it are not very tech-literate, so I want it as fool proof as possible; thus I don't want a DLL they can delete and stop themselves from running it. Thanks, James. DAAClaimParser_Flagged.zip Report.txt
  4. Hello, I decided to have a hyper scan scheduled to run each day, but this means a notification each time I start my computer. It would be great if there was an option to stop the notification appearing at the bottom right of the screen if nothing was detected. Also, wrong section (probably?) but I'll mention it here anyways: if you have more than one scheduled scan and then tick more than one, then untick until you have only one ticked, the edit button will be editing the last unticked and not the remaining ticked item. So basically the edit button uses the last interacted item instead of what's ticked which can be confusing. Thanks, Jamestec.
  5. Hello, I've been having problems connecting to hotmail.com for my emails last few days on both of the computers (Windows 7 Pro) in my house. When I try to connect Chrome(39.0.2171.95 m) gives ERR_CONNECTION_RESET, so does Firefox(34.0.5) and IE(11.0.9600.17501). I've tried: Incognito, disabling all plug ins, clearing temporary files, deleting cache, clearing live.com cookies -> no work Accessing hotmail.com when connected to a VPN to the USA -> no work Uninstalling openvpn connect + restart -> no work New router IP for my computer -> no work Accessing hotmail.com via a VM (Oracle) using old IE -> DOES work, but I don't want to fire up an Win XP VM each time I want to check my email. This is my hosts file; # Copyright (c) 1993-2009 Microsoft Corp. # # This is a sample HOSTS file used by Microsoft TCP/IP for Windows. # # This file contains the mappings of IP addresses to host names. Each # entry should be kept on an individual line. The IP address should # be placed in the first column followed by the corresponding host name. # The IP address and the host name should be separated by at least one # space. # # Additionally, comments (such as these) may be inserted on individual # lines or following the machine name denoted by a '#' symbol. # # For example: # # 102.54.94.97 rhino.acme.com # source server # 38.25.63.10 x.acme.com # x client host # localhost name resolution is handled within DNS itself. # 127.0.0.1 localhost # ::1 localhost # BEGIN section for OpenVPN Client SSL sites 127.94.0.1 client.openvpn.net # END section for OpenVPN Client SSL sites I can access hotmail.com on my android phone, but not on both my Windows 7 Pro computers. There was no major update/install that I did before this event. When I ping hotmail.com, my computer gives 157.55.152.112 and my android phone gives 157.56.172.28, which both check out on http://cqcounter.com/whois/to be Microsoft Corp's server. Ran a scan with Bitdefender and Malwarebytes, nothing comes up. Any ideas why this is happening?
  6. Results time. Still using MBAM 2.0.1.1004 (no notification of updates). Dates are in dd/mm/yy. 21/04/14 Made from scratch new scans; Daily Hyperscan at 12:00AM and Weekly Threatscan at 12:00AM Saturdays. Scan option screenies in Google Drive (link bellow); "HyperDaily.png" "ThreatWeekly.png". 22/04/14 Computer was off overnight. Turned on and logged into the computer later than scheduled time (10:00), ran a custom (non-scheduled) scan at 17:00, mbam-check incorrectly shows LastScanType as Hyper instead of Custom. No scheduled scans ran. 23/04/14 Computer was off overnight. Turned on and logged into the computer later than scheduled time (13:00). No scheduled scans ran. Incorrect LastScanType still persists 24/04/14 Computer was off overnight. Turned on and logged into the computer later than scheduled time (14:00). No scheduled scans ran. Incorrect LastScanType still persists. 25/04/14 Computer was off overnight. Turned on and logged into the computer earlier than scheduled time (12:00). Scheduled Hyper scan ran. mbam-check incorrectly shows LastScanType as Custom instead of Hyper. 26/04/14 Computer was on until 00:30 26/04/14. Scheduled Threat scan ran, scheduled Hyper didn't. mbam-check correctly shows LastScanType as Threat. 27/04/14 Computer was on overnight but not logged in. Was logged in for next scheduled Hyper scan which happened. mbam-check incorrectly shows LastScanType as Custom instead of Hyper. 28/04/14 - 01/05/14 Forgot about this, computer was on for all scheduled Hyper scans (scheduled range about 22:30 - 23:00). Noticed MBAM 2.0.1.1004's dashboard did not update Next Scheduled Scan (in comparison to mbam-check's log). 02/05/14 Computer was on overnight but not logged in. Logged in later than scheduled time, no scheduled scans ran. 03/05/14 Computer was on overnight but not logged in. Logged in later than scheduled time (20:50), no scheduled scans ran. mbam-check logs in Google Drive. Dates are in dd/mm/yy. Picture of Application Logs in Google Drive; "ApplicationLogs.png". Google Drive; https://drive.google.com/folderview?id=0B3ALVHGlY6tBRGI5WUhFZlBSOTQ&usp=sharing If you would like the pictures and mbam-check logs as an attachment, I can post them in a new reply.
  7. Oh yea, all three scans worked today (though 1 hour delay o.O). Like yesterday (which only 1 of the 3 scans scanned) I had my computer fully off. I'll remake the daily Hyper Scan (for 00:00 22/04/14) and remove the Custom and Threat scans; turn my computer completely off tonight and if the scan works; the next night I'll leave my computer on but not logged in to see if it works. If it still works, probably version 2.0.1.1004 fixed it or something (I was using 2.0.1.1000 before I was instructed to do a clean install).
  8. And about the alternate data streams, I don't know what they are, in the logs it just listed the .exes in my downloads folder. I'm pretty sure I haven't launched the "SwiftKit(Install).exe" before and I'll go delete it now since it was like from last year I started Runescape again for its world event. If I did launch it, I probably launched it sandboxed... like I launched these logging tools.
  9. Yea I set those settings. I use Firefox as my proxy browser when I don't want to VPN all my traffic; so I can just launch PuTTY with my SOCKS5 setting, open firefox and no hassle proxy .
  10. Update; The Hyper scan scanned today at 16:29 20/04/14, but the Custom and Threat scan did not scan even though they were both set as daily and 23 hour recovery. My computer was fully off this time.
  11. Did clean install. Did FRST scan after clean install. Did mbam-check a day after (when scan no recover). Logs attached. I left my computer on overnight (starting 22:30 17/04/14), but did not log in. I logged in at around 2:30PM, did some work until 4PM, no scans in Application Logs. Did mbam-check, looked at Scheduler Queue, decided to add Hyper Scan at 13:00 18/04/14 with 6 hour recovery to see what nextscheduled of it was; new scan did not appear after new mbam-check. Restarted computer, new scan still did not appear in new mbam-check. Edited old scan to 6 hours, change did not reflect in new mbam-check. Reverted changes. Added new scan at 16:20 for 16:21 17/04/14 with Recovery Option 7 hours, logged out. Logged back in at 16:26, no new scan log in Application Logs and no new Schedular Queue with new mbam-check. Deleted new scan. Gave up, new mbam-check, posting reply in thread. FRST.txt Addition.txt CheckResults.txt
  12. Sort of similar to; https://forums.malwarebytes.org/index.php?showtopic=146508 But I don't want to hijack the thread and I'm also going to assume that "Recover if missed by" means that when it's set to 12 hours for a daily scan, if it's scheduled for 00:00 14/04/14 and you start the computer at 11:00 14/04/14, it will still do the scan for the day (13:00 14/04/14 it will not). With this assumption, I'd like to report that the Recovery Option for Automated Scheduling is not working properly. http://i.imgur.com/EDPtk39.png As you can see, it's missed the 11th to the 16th scans even though the computer has been on for those days (just not on or logged in around 00:00 aka 12AM). The scan 17/04/14 was done because I did leave my computer logged on until 00:00 to test whether the scheduling actually works or not. The settings for this scan; http://i.imgur.com/WVYYJYV.png Also, you can see the "Repeats once every 0 week(s)" bug reported at (#2); https://forums.malwarebytes.org/index.php?showtopic=146780 This bug seems to happen after you restart the computer. It's fine when you schedule the task, but after you restart the computer it'll say "every 0 weeks". This also happens for Reoccurance > 1 week and regardless if a Recovery Option is set. My settings for the weekly scan; http://i.imgur.com/RYk7vno.png All of my scheduled scans where created new, meaning I deleted all of the default ones and re-added the ones I desired.
  13. I don't know how to edit my post, so I'm replying. In regards to the suggestion of having a filter for the Application Logs, perhaps a check box to hide scan logs that didn't find anything. Then I can still save my weekly threat scans but still sort through them easily if I need to regurgitate a log which had a hit.
  14. This is for Malwarebytes 2.0. Perhaps we can have an addition Logging Option for a scheduled scan to control whether a log is saved if the scan returns nothing. For Hyper scans that are scheduled every day, this will help sort out the Application Logs and keep unnecessary logs out. Additionally perhaps the Application Logs section can also have a filter for type and a date range. .
  15. Thanks, but could you please tell me why; Java™ SE Development Kit 6 Update 26 has to be uninstalled? Is it infected? I was told I needed it for Java.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.