Madimus

"FBI" hijack virus

3 posts in this topic

So, I've been infected with this FBI virus. I can still boot in safemode and seem to be able to run ok. But Malwarebytes does not seem to catch it. I have ran TDSSKiller in the recommended modes, as well as, combofix. Combo fix seems to work until it actually activates the virus and I have to restart. Attached are the dds and attch files requested, a Rkill log. Any help would be greatly appreciated. Thanks

attach.txt

dds.txt

Share this post


Link to post
Share on other sites

Please do the following:

Download the appropriate version for your system of the Farbar Recovery Scan Tool and save it to a flash drive.

Plug the flashdrive into the infected PC.

Enter System Recovery Options.

To enter System Recovery Options from the Advanced Boot Options:

  • Restart the computer.
  • As soon as the BIOS is loaded begin tapping the F8 key until Advanced Boot Options appears.
  • Use the arrow keys to select the Repair your computer menu item.
  • Choose your language settings, and then click Next.
  • Select the operating system you want to repair, and then click Next.
  • Select your user account and click Next.

To enter System Recovery Options by using Windows installation disc:

  • Insert the installation disc.
  • Restart your computer.
  • If prompted, press any key to start Windows from the installation disc. If your computer is not configured to start from a CD or DVD, check your BIOS settings.
  • Click Repair your computer.
  • Choose your language settings, and then click Next.
  • Select the operating system you want to repair, and then click Next.
  • Select your user account an click Next.

On the System Recovery Options menu you will get the following options:


    • Startup Repair
      System Restore
      Windows Complete PC Restore
      Windows Memory Diagnostic Tool
      Command Prompt

[*]Select Command Prompt

[*]In the command window type in notepad and press Enter.

[*]The notepad opens. Under File menu select Open.

[*]Select "Computer" and find your flash drive letter and close the notepad.

[*]In the command window type e:\frst.exe (for x64 bit version type e:\frst64) and press Enter

Note: Replace letter e with the drive letter of your flash drive.

[*]The tool will start to run.

[*]When the tool opens click Yes to the disclaimer.

[*]Place a check next to List Drivers MD5 as well as the default check marks that are already there

[*]Press Scan button.

[*]type exit and reboot the computer normally

[*]FRST will make a log (FRST.txt) on the flash drive, please copy and paste the log in your reply.

Share this post


Link to post
Share on other sites

Due to the lack of feedback this topic is closed to prevent others from posting here. If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.

Other members who need assistance please start your own topic in a new thread. Thanks!

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.