Jump to content

windows update error code 80070216


Recommended Posts

Hello and post-32477-1261866970.gif

 

P2P/Piracy Warning:

 

   

If you're using Peer 2 Peer software such as uTorrent, BitTorrent or similar you must either fully uninstall them or completely disable them from running while being assisted here.

Failure to remove or disable such software will result in your topic being closed and no further assistance being provided.

If you have illegal/cracked software, cracks, keygens etc. on the system, please remove or uninstall them now and read the policy on Piracy.

 

 

Run FRST one more time:

 

Type the following in the edit box after "Search:".

 

rpcss.dll

 

Click Search button and post the log (Search.txt) it makes to your reply.

 

 

Kevin

Link to post
Share on other sites

HI. Here is the contents of search.txt:

 

Farbar Recovery Scan Tool (x64) Version: 04-05-2014
Ran by Aaron Grulkowski at 2014-05-04 20:32:20
Running from C:\Users\Aaron Grulkowski\Downloads
Boot Mode: Normal

================== Search: "rpcss.dll" ===================

C:\Windows\winsxs\amd64_microsoft-windows-com-base-qfe-rpcss_31bf3856ad364e35_6.1.7601.17514_none_c7f0e16b547f887d\rpcss.dll
[2010-11-20 21:24] - [2010-11-20 21:24] - 0512000 ____A (Microsoft Corporation) 5C627D1B1138676C0A7AB2C2C190D123

C:\Windows\System32\rpcss.dll
[2010-11-20 21:24] - [2010-11-20 21:24] - 0513536 ____A (Microsoft Corporation) 23B9AD08DA219C315061F8EA6BB12073

====== End Of Search ======

Link to post
Share on other sites

Download attached fixlist.txt file and save it to the Desktop, or the folder you saved FRST into.

NOTE. It's important that both FRST and fixlist.txt are in the same location or the fix will not work.

 

Run FRST and press the Fix button just once and wait.

The tool will make a log on the Desktop (Fixlog.txt) or the folder it was ran from. Please post it to your reply.

 

Next,

 


On the Dashboard, click the 'Update Now >>' link
After the update completes, click the 'Scan Now >>' button.
Or, on the Dashboard, click the Scan Now >> button.
If an update is available, click the Update Now button.
A Threat Scan will begin.
When the scan is complete, if there have been detections, click Apply Actions to allow MBAM to clean what was detected.
In most cases, a restart will be required.
Wait for the prompt to restart the computer to appear, then click on Yes.

 

How to get logs:

(Export log to save as txt)

 


After the restart once you are back at your desktop, open MBAM once more.
Click on the History tab > Application Logs.
Double click on the scan log which shows the Date and time of the scan just performed.
Click 'Export'.
Click 'Text file (*.txt)'
In the Save File dialog box which appears, click on Desktop.
In the File name: box type a name for your scan log.
A message box named 'File Saved' should appear stating "Your file has been successfully exported".
Click Ok
Attach that saved log to your next reply.

 

Next,

 

Download AdwCleaner by Xplode onto your Desktop.


Double click on Adwcleaner.exe to run the tool.
Click on Scan
Once the scan is done, click on the Clean button.
You will get a prompt asking to close all programs. Click OK.
Click OK again to reboot your computer.
A text file will open after the restart. Please post the content of that logfile in your reply.
You can also find the logfile at C:\AdwCleaner[sn].txt.

 

Next,

 

thisisujrt.gif Please download Junkware Removal Tool to your desktop.


Shut down your protection software now to avoid potential conflicts.
Run the tool by double-clicking it. If you are using Windows Vista, 7, or 8; instead of double-clicking, right-mouse click JRT.exe and select "Run as Administrator".
The tool will open and start scanning your system.
Please be patient as this can take a while to complete depending on your system's specifications.
On completion, a log (JRT.txt) is saved to your desktop and will automatically open.
Post the contents of JRT.txt into your next message.

 

Next,

 

Download Security Check by screen317 from either of the following:

http://screen317.spywareinfoforum.org/SecurityCheck.exe or http://screen317.changelog.fr/SecurityCheck.exe

Save it to your Desktop. (If your security alerts either accept the alert, or turn the security off while Secuirity Check runs)

Double click SecurityCheck.exe (Vista or Windows 7/8 users right click and select "Run as Administrator") and follow the onscreen instructions inside of the black box. Press any key when asked.

A Notepad document should open automatically called checkup.txt; please post the contents of that document.

 

If Security Check will not run or you get an alert saying it is not supported, Re-boot your PC then try again...

 

Let me see those logs, also give an update on any remaining issues or concerns...

 

Kevin

 

 

 

 

fixlist.txt

Link to post
Share on other sites

Hi. I have attached all logs/.txt files that you requested. I was able to download all windows updates and have not heard any background sounds. So far so good! You are a lifesaver! I will be recommending MBAM to everyone. I can not thank you enough! I will let you know If any problems arise. Have a great day!

AdwCleanerS1.txt

checkup.txt

Fixlog.txt

mbamlog.txt

Link to post
Share on other sites

We need to run an online AV scan to ensure there are no remnants of any infection left on your system that may have been missed. This scan is very thorough and well worth running, it can take several hours please be patient and let it complete:

 

Run Eset Online Scanner

 

**Note** You will need to use Internet explorer for this scan - Vista and Windows 7/8 right click on IE shortcut and run as admin

 

Go to Eset web page http://www.eset.com/us/online-scanner/ to run an online scan from ESET.

 


Turn off the real time scanner of any existing antivirus program while performing the online scan
click on the Run ESET Online Scanner button
Tick the box next to YES, I accept the Terms of Use.
Click Start
When asked, allow the add/on to be installed
Click Start
Make sure that the option "Remove found threats"  is UNticked
Click on Advanced Settings, ensure the options
Scan for potentially unwanted applications, Scan for potentially unsafe applications, and Enable Anti-Stealth Technology are ticked.
Click Scan
wait for the virus definitions to be downloaded
Wait for the scan to finish

 

When the scan is complete

 


If no threats were found
put a checkmark in "Uninstall application on close"
close program
report to me that nothing was found

 

If threats were found

 


click on "list of threats found"
click on "export to text file" and save it as ESET SCAN and save to the desktop
Click on back
put a checkmark in "Uninstall application on close"
click on finish

 

close program

 

Copy and paste the report in next reply.

 

Thanks,

 

Kevin

Link to post
Share on other sites

Double click OTM.exe to start the tool. Vista or Windows 7 users accepy UAC alert. Be aware all processes will be stopped during run, also Desktop will disappear, this will be put back on completion.... If your security alerts to OTM either, accept the alert or turn off security until OTM completes...

  • Copy the text from the code box belowbelow to the clipboard by highlighting ALL of them and pressing CTRL + C (or, after highlighting, right-click and choose Copy). Ensure to start with and include the colon before Files :Files

    :Filesipconfig /flushdns /cC:\Users\Aaron Grulkowski\AppData\LocalLow\wtnwsmr.dll    C:\Users\Aaron Grulkowski\Downloads\cbsidlm-tr1_5-BSR_Screen_Recorder-10198470.exeC:\Users\Aaron Grulkowski\Downloads\ccsetup413.exe    C:\Users\Aaron Grulkowski\Downloads\nortoninternetsecurity2012-setup.exe    C:\Users\Aaron Grulkowski\Downloads\zafwSetupWeb_131_211_000.exe    C:\Program Files (x86)\NCH Software:Commands[EmptyTemp]
  • Return to OTMoveIt3, right click in the "Paste Instructions for Items to be Moved" window (under the yellow bar) and choose Paste.
  • Click the red btnmoveit.png button.
  • Copy everything in the Results window (under the green bar) to the clipboard by highlighting ALL of them and pressing CTRL + C (or, after highlighting, right-click and choose copy), and paste it in your next reply.
  • Close OTM

Note: If a file or folder cannot be moved immediately you may be asked to reboot the machine to finish the move process. If you are asked to reboot the machine choose Yes.

If the machine reboots, the Results log can be found here:

c:\_OTMoveIt\MovedFiles\mmddyyyy_hhmmss.log

Where mmddyyyy_hhmmss is the date of the tool run.

 

Let me see the log from OTL, also give an update on any remaining issues or concerns....

 

Kevin

Link to post
Share on other sites

Yes OTL was a typo... run the following to clean up:

 

Download "Delfix by Xplode" and save it to your desktop.

 

"Delfix link mirror"

 

Double Click to start the program. If you are using Vista or higher, please right-click and choose run as administrator

 

Make Sure the following items are checked:

 


    Activate UAC
    Remove disinfection tools
    Create registry backup
    Purge System Restore
    Reset system settings

 

Now click on "Run" and wait patiently until the tool has completed.

 

The tool will create a log when it has completed. We don't need you to post this.

 

Part of the routine will be to create a registry back up with ERUNT,  the back up will be created here:

 

C:\Windows\ERUNT

 

When all is known to be well with your system you can delete that back up folder if you consider it as not needed...

 

If no remaning issues are we ok to close out?

 

Also read the following link to fully understand PC security and best practices, you may find it useful....

 

http://www.bleepingcomputer.com/forums/t/407147/answers-to-common-security-questions-best-practices/#entry2316629

 

Kevin...

Link to post
Share on other sites

  • 3 weeks later...
  • Root Admin

Glad we could help. :)

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.

Other members who need assistance please start your own topic in a new thread. Thanks!

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.